Skip to content

Samsung TV Volume Not Working / Stuck

    Technology is used to make life easier for users. Various devices and inventions are made specifically for the purpose, entertainment, or both. There are endless possibilities for using technology to improve our daily lives. But, even the most sophisticated technology will have some problems occasionally.

    Most of the time, the issue is that too many downloaded applications are consuming the TV’s memory and requiring an update to the system or maybe a change of batteries on the remote. However, overloading memory is usually the primary cause of lag or other issues like volume sticking.

    Sometimes, glitches or malfunctions could cause anxiety or stress. This may appear as if the issue is more critical than it is. Most of the time, these issues can be resolved with straightforward solutions like shutting down apps that are not being used or upgrading the Samsung television system. Keep reading to explore the various options for fixing an unresponsive Samsung TV volume.

    Why is Samsung TV Volume stuck at 0?

    The Samsung TV’s volume could be stuck at zero due to an unresponsive volume button. In other cases, the importance of the TV could be set down. If neither is working, there could be a glitch in the internal circuitry of the TV.

    If this isn’t working, the reason could be some issue in the TV’s hardware, which needs to be addressed by an expert.

    But, let’s identify the issue and then fix it by following the steps before contacting the technician.

    Samsung TV Volume Stuck / Locked Up Video

    With new features constantly added, it can be challenging to determine what causes the Samsung TV’s volume to stop working. I hope the video above about unblocking your Samsung TV was useful. If the suggestions in the video weren’t enough to help you clear your TV volume, read this article, and I’ll provide some additional ways to help you unlock your volume.

    In general, Samsung TV volume is typically caused by applications running in the background or too many applications taking the TV’s memory, resulting in low performance. You can boost its performance on your television by switching off AUTORUN Smart HUB or releasing the TV’s memory by deleting applications that are not used.

    Fix Samsung TV Volume Control Problems

    Use your Cable or SAT/DISH remotes to adjust the Samsung TV’s volume.

    Examine the infrared region on the TV to ensure nothing is blocking it.

    Install new batteries in your Samsung remote control, which controls the TV.

    Please turn off the TV and switch it back on (unplug your TV and wait for five minutes to try a reset).

    Set the audio settings in the menu to ensure that the TV’s speakers are on.

    Take the batteries off the Samsung remote and press to power for between 10 and 60 minutes.

    Select the Options menu and switch off Auto-run Smart Features. Go to: SETTINGS > GENERAL > SMART FEATURES > AUTO RUN SMART HUB (then disable it). OR, Go to: SETTINGS > SUPPORT > SELF DIAGNOSE > RESET SMART HUB.

    If none of the above solutions has worked, try resetting your Samsung TV to factory settings by accessing the menu and selecting FACTORY RESET.

    Reset the sound to your Samsung TV

    Samsung TVs can also reset the sound settings back to the factory defaults, so you don’t have to be able to reboot the whole television for just one purpose.

    To change the sound settings of your Samsung TV:

    Go to the Settings menu from the Sound panel.

    Choose Sound > Expert Settings.

    Select Reset Sound.

    Select Reset to begin the process.

    After the sound settings have been reset, you can try changing the sound volume on the television.

    Samsung TV Volume Keeps Turning Down

    Some users have had problems with their Samsung TV’s volume decreasing by itself without having to do it. The issue can be fixed by following a straightforward procedure. If the book on your Samsung TV is slipping, check out the suggestions below.

    Then, you must open your Settings menu on the Samsung TV

    Then, go to Sound > Expert Settings.

    Select your choice HDMI For Input Audio Format.

    Now, switch Bitstream to PCM.

    The volume issue will likely disappear after you change your Bitstream into PCM.

    Contact Samsung Support

    If nothing else works is when you need to call for assistance. The tested solutions will likely solve many of the memory and software problems. They’re not going to repair hardware problems or defects, but they should be able to fix them.

    Samsung support can assist you in determining if your television is still covered under warranty and will help you choose the alternatives to repair or replace can avail.

    What’s the reason for The Samsung TV Volume Stuck Issue?

    After going through the steps of resolving this Samsung TV Volume Stuck issue, we concluded that the following were the primary reasons for the reason it was started in the first instance.

    Older Firmware: It’s possible that the Firmware of the TV is outdated in certain instances, because of which the Samsung TV Volume has been stuck. So, we recommend you attempt to update your Firmware and whether this resolves the problem.

    Third-Party Applications: Sometimes, the third-party apps that may be installed on your PC could affect its functioning and result in your Samsung TV Volume being stuck. So, we recommend you uninstall any third-party applications and see whether this resolves the problem.

    Samsung TV Firmware: in a few situations, the Firmware could be corrupted, and the only solution to repair it is to reset it to ensure it can be completely installed. We recommend you attempt this using the methods we’ve provided below.


    It’s a typical issue for many users to encounter problems with the volume on the sound system of their Samsung TVs. Sometimes, the book doesn’t function, or the sound gets blurred or does not work.

    Samsung has released troubleshooting instructions for its TV users to resolve Samsung’s problems with the volume on their TVs.

    To correct volume issues: First, make sure that there is a connection between your TV’s optical cable and the receiver using a different device, such as an amplifier or an alternative Samsung TV.

    If this doesn’t work, try switching HDMI cables between the two devices until you can find the one that functions properly.

    Leave a Reply

    Your email address will not be published. Required fields are marked *